Description
- Available: november 2020
- Multisensor KNX device
- Consists of a KNX passive infrared presence sensor and an air quality sensor (= 2 bus device)
- Air quality detection functions:
- Measures CO2 level, relative humidity, temperature and air pressure
- Three independent configurable thresholds for CO2 level and relative humidity
- Built-in individual room thermostat
- 4 binary inputs
- Presence detection functions:
- Square 360° detection range (up to 100 m2) for safe and easy design
- 3 channel light detection and 2 channel presence detection
- 2 channel lighting with C1, C2 light, 2 light measurement and additional C3 light channel without brightness measurement
- 2 presence channels can be set separately
- Applicable to 3 channel light measurement
- Natural light measurement for LEDs, fluorescent (FL / PL / ESL) and halogen / incandescent
- Can be used in full or semi-automatic mode
- Switching or constant brightness control mode with standby function
- Adjustable lighting in switching mode with standby function
- Brightness switching value can be adjusted per Lux both on the device and by remote control
- The baseline value can be set in lux both during parameterization and by remote control
- The brightness switching value or the baseline value can be set to the measured value
- The room correction factor can be set to calibrate the brightness measurement
- The time delay of the follow-up can be parameterized or can be set by remote control
- Switch-on delay and presence delay can be set
- Sensitivity of detection can be set
- Self-learning delay
- Shorter delay for shorter room stays (short presence)
- Preset lighting image functions
- Extremely simple energy-saving features with the new "eco plus" function
- Test mode to check operation and detection range
- Multiple sensors can be connected in parallel in Master/Slave or Master/Master mode
- Separate user and operating remote control (optional)
- Room monitoring
–
Technical data
| Mounting height | 2-10 m |
| Minimum height | Ø 1,7 |
Measuring brightness | 5 – 3000 lx |
Detection range | 360° |
| Type of mounting | Ceiling installation |
Lighting switch-off delay | 30 s - 60 min /inactive/on |
| Light sources | Energy saving lamps, fluorescent lamps, incandescent lamps / halogen lamps, LEDs |
| Light measurement | Mixed metering |
| Presence disconnection delay | 10 s – 120 min |
| Power on delay presence | 10 s – 30 min / inaktív |
| Ambient temperature | 5 °C … 40 °C |
| Detection range | 81 m² (9,0 x 9,0 m) |
| Color | White |
| CO2 measuring range | 300 – 5000 ppm |
| Setting the temperature range | -5 °C … 45 °C |
| Measuring range of air pressure | 110000 – 30000 Pa |
| Measuring humidity | 1 – 100 % rP |
| The binary input wire is max. | 30 m |
| IP protection | IP 20 |
Reference values for detection ranges
Mounting height (A) | Sitting man (S) | Walking man (T) |
2 m | 20 m² | 4.5 m x 4.5 m | 36 m² | 6 m x 6 m ± 0.5 m |
2,5 m | 36 m² | 6 m x 6 m | 64 m² | 8 m x 8 m ± 0.5 m |
3 m | 49 m² | 7 m x 7 m | 81 m² | 9 m x 9 m ± 1 m |
3,5 m | 64 m² | 8 m x 8 m | 100 m² | 10 m x 10 m ± 1 m |
5 m | 144 m² | 12 m x 12 m ± 1.5 m | |
10 m | 400 m² | 20 m x 20 m ± 2 m |
Scale drawing
